CONTENTS Chapter 1: Introduction-Concept of Stress Chapter 2: Stress and Strain-Axial Loading Chapter 3: Torsion Chapter 4: Pure Bending Chapter 5: Analysis and Design of Beams for Bending Chapter 6: Shearing Stresses in Beams and Thin-Walled Members Chapter 7: Transformations of Stress and Strain Chapter 8: Principal Stresses Under a Given Loading Chapter 9: Deflection of Beams Chapter 10: Columns Chapter 11: Energy Methods Appendices A. Moments of Areas B. Typical Properties of Selected Materials Used in Engineering C. Properties of Rolled-Steel Shapes D. Beam Deflections and Slopes E. Fundamentals of Engineering Examination
ABOUT THE AUTHORS FERDINAND BEER Born in France and educated in France and Switzerland, Ferd held an M.S. degree from the Sorbonne and an Sc.D. degree in theoretical mechanics from the University of Geneva. He came to the United States after serving in the French army during the early part of World War II and had taught for four years at Williams College in the Williams-MIT joint arts and engineering program. Following his service at Williams College, Ferd joined the faculty of Lehigh University where he taught for thirty-seven years. He held several positions, including the University Distinguished Professors Chair and Chairman of the Mechanical Engineering and Mechanics Department, and in 1995 Ferd was awarded an honorary Doctor of Engineering degree by Lehigh University. E. RUSSELL JOHNSTON, JR. Born in Philadelphia, Russ holds a B.S. degree in civil engineering from the University of Delaware and an Sc.D. degree in the field of structural engineering from The Massachusetts Institute of Technology (MIT). He taught at Lehigh University and Worchester Polytechnic Institute (WPI) before joining the faculty of the University of Connecticut where he held the position of Chairman of the Civil Engineering Department and taught for twenty-six years. In 1991 Russ received the Outstanding Civil Engineer Award from the Connecticut Section of the American Society of Civil Engineers. JOHN DEWOLF John T. DeWolf, Professor of Civil Engineering at the University of Connecticut, joined the Beer and Johnston team as an author on the second edition of Mechanics of Materials. John holds a B.S. degree in civil engineering from the University of Hawaii and M.E. and Ph.D. degrees in structural engineering from Cornell University. His research interests are in the area of elastic stability, bridge monitoring, and structural analysis and design. He is a registered Professional Engineer and a member of the Connecticut Board of Professional Engineers. He was selected as the University of Connecticut Teaching Fellow in 2006. DAVID MAZUREK David holds a B.S. degree in ocean engineering and a M.S. degree in civil engineering from the Florida Institute of Technology, and a Ph.D. degree in civil engineering from the University of Connecticut. He was employed by General Dynamics Corporation Electric Boat Division for five years, where he provided submarine construction support and conducted engineering design and analysis associated with pressure hull and other structures. In addition, he conducted research in the area of noise and vibration transmission reduction in submarines. He then taught at Lafayette College for one year prior to joining the civil engineering faculty at the U.S. Coast Guard Academy, where he has been since 1990. David is currently a member of the American Railway Engineering & Maintenance-of-way Association Committee 15 (Steel Structures), and the American Society of Civil Engineers Committee on Blast, Shock, and Vibratory Effects. He has also worked with the Federal Railroad Administration on their bridge inspection training program. Professional interests include bridge engineering, railroad engineering, tall towers, structural forensics, and blast-resistant design. He is a licensed professional engineer in Connecticut and Pennsylvania.